This industrial grade cooling system flush containes the same active ingredients as the Irontite flush but you actually receive around 50g more of the product at a much cheaper price

 The Flush we are offering is one of the strongest cooling system cleaners on the market. Over using it may cause damage. Follow the instructions given on the sheet which will be provided to ensure the product can reach its full potential. This product has a red dye added to it specifically so you can tell when you have completely flushed it from the system. Failure to remove it completely or in a timely fashion can cause damage to your engine
 

For Industrial/Professional use only

1. Drain cooling system.

2. Pre-mix 1 bottle of flush with 3 litres of hot (not boiling) water.

3. Pour the mixture into the radiator. 1 bottle for each 24 litres of cooling system capacity and refill system with fresh water.

4. Run vehicle at operating temperature for 10 minutes. Do not boil.

5. Allow system to cool, drain fully and flush with fresh water.

FOR INDUSTRIAL USE ONLY

Handle with care. Wear mask, gloves and goggles. Use only in well ventilated area. Do not swallow, get on skin or clothing, do not breathe fumes. Do not mix with other household chemicals.

First Aid Treatment

If swallowed contact a Doctor immediately. Do not induce vomiting.

If in eyes, rinse eyes for at least 15 minutes. If on skin, rinse area with water thoroughly. If on clothes, remove clothes. If inhaled, move person into fresh air.