• Browse Categories
• Oil Stabilizers
• Engine Block/Head Sealers
• Stop Leaks/Stop Slip
• Fuel System
• Gearbox oils
• Engine Oils
• Alloy/Metal Welding
• Anti Friction Treatments
• Greases
• Specialist Injector Tools
• Motorcycle Oils
• Polishes
• Hydraulic Oil and Stop Leaks
• Copper Jointing
• Engine & Cooling System Flush
• Information
• Home Page
• Terms/Conditions
• Contact 
• Links 

Pro Seal Quick Cold Welding Compound (proweld)

Engine Oils > Show All > Pro Seal Quick Cold Welding Compound

Pro Seal Quick Cold Welding Compound   Quick Set Epoxy steel fully cures in 4 minutes to resist temperatures up to 300°F (150°C). Can be drilled, tapped, machined, filed, or sanded. Resistant to gasoline, diesel fuel, oil water and antifreeze. For repairing cracks in transmission and rear end casings, manifolds, radiator seams, casting defects and keyways .Very effective and more malable than Kwik steel     PACER TECHNOLOGY                                              PRODUCT: PRO WELD Quick Cold Welding Compound   PRODUCT DATA SHEET Pacer Technology’s Pro Seal PRO WELD Quick Cold Welding Compound is a two part epoxy adhesive system that is formulated to resist temperatures up to 3000F and withstand drilling, machining or sanding. Typical applications include the repair of cracks in transmission and rear end casings, manifolds, radiator seams, casting defects and keyways.    PROPERTIES - LIQUID PRODUCT Chemical Base                                               Epoxy resin                                Epoxy hardener Color                                                  Dark Gray or Black paste             Gray paste Viscosity, cP                                        600,000                                              500,000 Mix Ratio                                                                1:1 mix of equal parts   PROPERTIES - MIXED PRODUCT Set Time                                                                          4 Minutes Full Cure                                                                          24 hours Maximum Gap                                                                  .25" Tensile Strength, ASTM D638                                            2040 psi (± 20%) Tensile Shear Strength  ASTM D 1002, Steel/Steel                                                1072 psi (± 20%) Service Temperature Range                            -650F to +2500F (-540C to +1210C) Hardness, Shore D                                              73 (After curing 60 minutes)                                                                         83 (After full cure) USE INSTRUCTIONS 1.   Surfaces should be clean and dry, free from oil and grease. 2.   Roughen surfaces with emery cloth or sandpaper for best results.         Remove all residual dust. 3.   Mix equal amounts of resin and hardener thoroughly, for approximately 1 minute. 4.   Apply to both surfaces and mate parts together. 5.   Remove excess epoxy immediately with denatured alcohol. 6.   Fixtures in 60 minutes, full cure in 12 to 24 hours.    Price: £5.91 (ex vat)  £6.95 (inc vat)